Construction software, flat-rate and fully unified.
For GCs ready to stop paying more every time they win a job.
The short version.
A data-backed look at the real cost of staying on Procore — and what switching to Jet.Build actually returns. The full guide is below; here's what it concludes.
- Procore prices on a percentage of your construction volume — so your software cost rises every time you win bigger work. Jet.Build is flat-rate.
- Procore's strongest documented outcomes are reached by only a small fraction of teams; the gap is adoption, and adoption is a function of support.
- Jet.Build's support model — ~1-hour response, recurring training with the same team, in-person workshops, all included — is built to close that adoption gap.
- Seven specific ways the unit economics change when you switch.
- A side-by-side Jet.Build vs. industry-typical Procore pricing comparison.
- An interactive calculator to run your own numbers.
- How Jet.Build Foundations de-risks the switch.
Stop paying more every time you win a job.
Procore's pricing scales with your annual construction volume — so winning more work increases your bill.
Publicly available third-party estimates and customer-reported examples commonly place effective pricing around 0.1%–0.2% of annual construction volume, varying by package, modules, implementation, and contract. Procore doesn't publish pricing, so every figure here is an industry-typical estimate, not a quote for any specific firm.
"Most software gets cheaper per unit as you scale. Procore can get more expensive as you grow."
Priced as a % of your work
- Priced as a percentage of your annual construction volume
- Your bill grows when you win bigger work
- Renewal increases of ~5–14%/yr widely reported; steeper over long contracts
- Core modules and add-ons billed separately
- Implementation typically billed on top in year one
- Pricing isn't published — hard to benchmark
Predictable. Inclusive. Flat.
- Flat annual rate for the full platform
- Your bill doesn't grow when you win bigger work
- Predictable, transparent pricing at renewal
- Every capability included — no module fees
- Unlimited users, including subcontractors
- Foundations onboarding fee applies toward your license
Procore's best outcomes are real. Almost no one reaches them.
Procore publishes strong outcomes for its platform. Independent research — Dodge Construction Network, sponsored by Procore, covering 733 general contractors across 11 software platforms — confirms those outcomes are real.
But they only show up at full adoption. The same research scores teams across four maturity levels (light, moderate, advanced, optimized), and the gap between the floor and the ceiling is enormous.
Most teams never reach the ceiling. Only 9% of contractors operate at optimized adoption. More than nine in ten pay the full volume-based price while capturing a fraction of the value the software can deliver.
And waiting doesn't fix it. Tenure is a far weaker predictor of results than expertise — and expertise is exactly what a complex platform makes hard to reach.
"You pay for the ceiling and operate near the floor."
Source: Dodge Construction Network, "Quantifying the Value of Project Management Software for Construction," sponsored by Procore. Gap shows light-adoption floor → optimized-adoption ceiling among contractors across 11 software platforms.
Jet.Build's wedge is simple: a platform built to be learned fast gets more of your team to full value — turning the ROI Procore's own sponsored research says most firms never capture into ROI you actually realize.
Adoption isn't an accident. It's a support model.
The gap between Procore's documented outcomes and what most teams actually realize comes down to adoption — and adoption is driven by how support and training actually work. Jet.Build is built to get your whole team to full value fast, with a support model designed around adoption rather than ticket deflection.
- Jet.Build
- ~1-hour response
- Procore
- Ticket-based queue; response times vary, and users report tickets open for weeks to months
- Jet.Build
- Direct access to the same team, start through full ramp
- Procore
- Submit a ticket or search the community; users report difficulty reaching the same rep twice
- Jet.Build
- Weekly recurring training calls with the same team, plus in-person workshops
- Procore
- Self-serve, on-demand courses (Procore Academy); on-site/custom training billed as additional fees
- Jet.Build
- Included; structured Foundations program, live in under 14 days
- Procore
- CoreStart professional-services package starts at $5,000 for a 12-week onboarding; complex deployments $10,000–$30,000+
- Jet.Build
- Custom-built per client, included
- Procore
- ERP/accounting connector setup billed separately (e.g., ERP Launch Services)
- Jet.Build
- Flat, all-inclusive
- Procore
- Support tier, training, and implementation frequently priced as add-ons
Procore comparison reflects publicly available information and customer-reported experiences as of June 2026, including Procore's published support and training resources and third-party pricing analyses. Procore is a registered trademark of Procore Technologies, Inc. Jet.Build is not affiliated with or endorsed by Procore.
Procore's own sponsored research shows the documented outcomes are reached by a small fraction of teams. The difference isn't the software's ceiling — it's whether your team ever gets there. Jet.Build's support model exists to close that gap.
Seven ways the economics change.
Lower annual software cost
Flat-rate for the full platform, every capability and unlimited users included — commonly 60–70%+ below industry-typical Procore pricing.
No ACV success penalty
Winning more work doesn't raise your bill. The faster you grow, the bigger your savings versus volume-based pricing.
Faster adoption, lower training burden
New hires reach productivity in a fraction of Procore's three-to-six-month ramp, cutting training cost and lost capacity. In the Dodge research, contractors reporting productivity gains from onboarding new or replacement hires rose from 21% at light adoption to 74% at optimized — the faster your team reaches full capability, the sooner every new hire pays off.
Preconstruction & project planning
Planning, estimating, bid and budget development, and scheduling live in the same platform that runs execution — clean handoff, no leaks between systems. The same research shows the handoff from preconstruction to project management improves from 35% to 80% of contractors as adoption deepens — clean planning-to-execution flow is one of the biggest expertise-driven gains.
Learn more →Workflow automation
Build and run the approval and process workflows your team actually needs, removing the manual coordination that eats PM and admin hours.
Learn more →Jenny — AI built into the work
Jet.Build's built-in AI assistant, available today and improving through regular releases. Jenny takes friction out of repetitive PM and admin work — drafting and routing items like RFIs and submittals, searching documents, and pulling reports.
Potential margin improvement
Where your technology cost is recovered through fixed general conditions, overhead, or a negotiated allowance, lowering actual software spend can improve margin. Depends on your contract structure, cost-of-work definitions, and audit rights — evaluate with your finance and legal teams.
Learn more →Jet.Build vs. industry-typical Procore pricing.
Procore figures are benchmark estimates from public reporting and customer-reported examples — not a quote for any specific firm. Your real number goes into the calculator below.
- Jet.Build
- ~$10K
- Procore (est.)
- ~$36K
- Annual savings
- ~$26K
- 5-yr cumulative
- ~$157K
- Jet.Build
- ~$24K
- Procore (est.)
- ~$72K
- Annual savings
- ~$48K
- 5-yr cumulative
- ~$294K
- Jet.Build
- ~$55K
- Procore (est.)
- ~$135K
- Annual savings
- ~$80K
- 5-yr cumulative
- ~$501K
- Jet.Build
- ~$98K
- Procore (est.)
- ~$280K
- Annual savings
- ~$182K
- 5-yr cumulative
- ~$1.12M
- Jet.Build
- ~$150K
- Procore (est.)
- ~$485K
- Annual savings
- ~$335K
- 5-yr cumulative
- ~$2.04M
- Jet.Build
- ~$200K
- Procore (est.)
- ~$750K+
- Annual savings
- ~$550K+
- 5-yr cumulative
- ~$3.31M+
Mid Portfolio is the default scenario in the calculator below.
5-year cumulative assumes Procore escalating ~7% annually and Jet.Build held flat; software cost only. Annual savings range ~59%–73% across tiers. Dollar savings widen as you scale — exactly where volume-based pricing costs the most.
RISE, a federal construction operator, runs $9B+ of mission-critical work across the Northeast on a single unified Jet.Build platform — coordinating large, complex, high-oversight delivery with the audit posture government work demands. Flat-rate software scales to the most demanding GC environments without the cost curve climbing with every project.
Run your own numbers.
No hard-coded percentages. Every figure below is derived from what you enter. Adjust the inputs to match your situation.
Leave blank to use industry benchmark.
Dodge research: nearly half of optimized users save five or more hours per week. We default to a conservative 2.
- 5-yr software savings
- $501K
- 5-yr productivity savingsestimate
- $700K
- Avoided renewal escalation
- $101K
- Payback period
- 1 mo
The real cost of switching — and how we de-risk it.
A serious decision accounts for the cost of change. Here it is, on the table.
The honest costs
- Data migration — active projects, contacts, financials (commonly one to a few weeks for active data)
- Retraining on new habits
- A short-term productivity dip during transition
- Integration rebuilds (Jet.Build integrations are custom-built per client, fitted to how you work — never generic plug-and-play)
- Internal change management — adoption is organizational, not just technical
How Jet.Build Foundations de-risks it
- A defined migration plan — prioritize active/recent data, archive the rest
- Structured, hands-on onboarding that compresses time-to-value
- Custom-built integration scoping fitted to your stack
- A single accountable path through the transition
- The Foundations fee applies toward your annual license — onboarding is a credit, not a sunk cost. Not the right fit at month four? It ends cleanly, no further commitment.
1/4 the cost. Built for faster, fuller adoption.
Run your own numbers, then let's talk.
Procore pricing figures are industry-typical estimates based on publicly available reporting and customer-reported examples; Procore does not publish pricing, and figures vary by package, modules, implementation, and contract. Jet.Build tier pricing shown is illustrative and subject to scoping. Productivity, training, and technology-recovery figures are adjustable assumptions to be validated against your own operations and contracts. Jet.Build is not a financial or legal advisor. Adoption and benefit statistics are drawn from Dodge Construction Network's "Quantifying the Value of Project Management Software for Construction" (sponsored by Procore; 1,563 respondents including 733 general contractors; 11 software platforms). Figures describe project management software adoption generally, not any single platform.